Brickcom WVS-01Ap (D1/Wifi) Professional

Brickcom WVS-01Ap 1CH H.264 SD / SDHC Dual Voltage PoE Video Server with WiFi

The Brickcom VS-01A series is a high performance video server which helps users makes an easy transition from an analog to IP-based surveillance system. It offers a single channel solution which integrates any analog camera into the IP system. Equipped with outstanding video processing capabilities, the VS-01A brings the high video quality of IP cameras to any analog system.
The VS-01A is able to automatically scan analog signals (NTSC/PAL) and adapt to the optimum operation mode to offer the best video conversion. By offering H.264/M-JPEG/MPEG-4 triple codec compression, it is able to offer a flexible system which does not require high bandwidth and storage capabilities. Through these features, the VS-01A is able to simultaneously deliver dual configurable video streams at 30fps at D1 resolution.
The wireless model of the VS-01A transforms any analog camera into one that is not restricted by location or landforms. By adopting the technology of IEEE 802.11 a/b/g/n, the camera only needs to be set in an area with wireless coverage to transmit the video feed. The WPS button on the WVS-01A allows for easy configuration and troubleshooting by simplifying the complicated camera to AP/Router connection. Users do not have to worry about the data connection failing because each video server is equipped with a SD/SDHC memory card slot for local storage.
Support for Power over Ethernet enables the video server, as well as the analog camera, to use the same cable for power and data transmission, eliminating the need to install an external power supply.
By adopting the video enhancement technology of 3D de-interface, 3D noise reduction and WDR enhancement, the Brickcom VS-01A is able to produce video with the same smooth and detailed high quality offered by IP cameras.

• IEEE 802.11 a/b/g/n Compliance
• WPS button for easy configuration
• Built-in SD/SDHC Memory Card Slot for Local Storage
• Automatically scans NTSC/PAL to adapt optimum operation mode
• MPEG-4, MJPEG and H.264 Triple Codec Compression with Dual Simultaneous Streaming
• Built-in 802.3af Compliant POE (Power Over Ethernet)
• Built-in SD/SDHC Memory Card Slot for Local Storage
• 1 DI/DO for External Alarm and Sensor Device
• 3D deinterlace
• 3D noise reduction
• Image enhancement
• Product Specifications
• Hardware System CPU: 500 MHz
• Flash: 16M
• RAM: 64M DDR
• Video Image Compression : H.264/MPEG4 / MJPEG
• Analog composite video BNC input, NTSC/PAL auto-sensing Analog composite video BNC output
• Image Resolution and Frame Rate NTSC: 30fps@720x480
• PAL: 25fps@720x576
• Audio Audio Streaming: Two-way audio support
• Audio Input: Built-in microphone, external microphone or Line input
• Audio output: Line output
• Communication Ethernet : one 10/100Mbps RJ-45
• Supported Protocols : TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP, RTCP
• Front Interface BNC connector (Analog input) TV out (Analog output) Built-in MIC
• Rear Interface and Buttons DC Power Connector) Ethernet Cable Connector General I/O Terminal Block (RS485 included) External MIC/Line Input External Audio output Reset Button
• Power Power Input: AC 24V, DC 12V / 1A (Power Supply), PoE:802.3af Compliant
• Max Power Consumption: 10 watts
• Environment Operating Temperature : 0°C ~ 50°C (32°F ~ 122°F)
• Operating Humidity : 10% ~ 80%
• Other Certification: FCC, CE
• Dimensions: 120 x 60 x 60 mm
• Weight: 392 g
• Warranty: Limited 2-year Warranty